Bake in a private house

People most of all prefer simple stoves to heat the necessary room. No matter how trite it sounds, but with a great variety of heating devices in our time, the stoves still occupy a leading position. In order for the stove to serve for a long time, it must be correctly laid out. It is best, of course, to entrust the furnace work to professionals. The first thing where it is necessary to start laying the furnace is the foundation. The foundation is buried below the depth of freezing. According to the average criteria, the foundation is aligned to a depth of 0.5 to 1.5 meters. Then the whole structure is compacted. A special mixture is taken, which includes cement and sand 1: roofing material is lined with the bottom so that the solution is less absorbed into the ground. And, of course, the foundation will be stronger. This foundation does not need to be brought to the level of the floor. It will need to be raised in rows of brick, which will be laid out on a cement mortar. It is necessary to produce high -quality waterproofing. It is advisable to make it double. One sheet of roofing material must be put directly on the foundation, and the second on brickwork. Sometimes they practice to put the stove on the channits. What are Shans? These are peculiar columns that are built from a number of bricks and are laid out at a distance of 8-12 cm. From each other. Shantses overlap in two rows of brick, and the whole structure becomes the basis of an array of the furnace. It is necessary to pay special attention to the fact that the brick before laying the furnace needs to be soaked. Clay in the furnace should be as little as possible. The walls of the furnace and chimney should be perfectly even, otherwise the brick will begin to shift. It is advisable to fix the doors as reliable as possible. To do this, you can use wire, knitting needles or metal anchors. The main thing is to do everything meticulously and efficiently, then the built furnace will serve for many years.