Be sure to

It should be added that it is necessary to start with the preparation of the walls. The walls should be leveled with putty materials, and then smooth out all the roughness and irregularities using sandpaper. In order not to clog the floor with glue, it is necessary to cover it with old newspapers or plastic film. Before sticking wallpaper, you should make sure that the chosen glue is suitable for this type of wallpaper (carefully read the instructions). The wallpaper must be cut with a small allowance according to the length of the walls in the room. Be sure to make sure that the wall has the same length over the entire width. Otherwise, correcting the measurement errors, there may not be enough wallpaper. After the gluing ends, all the allowances are cut off. Work is painstaking, but the interior design will not spoil. We add that the wallpaper in which there is a texture or drawing need fitting. To save wallpaper, you can combine cuts from 2 different rolls. It is best to glue the wallpaper from the window so that there are no seams. After priming the walls, the wallpaper itself should be smeared with glue. You will need a rag to press the wallpaper to the wall. Passing it from top to bottom, it is necessary to expel the air formed bubbles. Then you need to remove excess glue with a clean rag along the seams.