The use of a signal lamp when lowering the spreader to the container

With accurate lowering the spreader, a signal lamp lights up on the container. The capture of the container with a sprider and the liberation of the container are carried out by short -term buttons, which is signaling with lamps. Heating the cooled oil into the hydra system of the spreader system is carried out by blocking the free circulation of the oil by pressing the button. At a negative air temperature, the oil heating is carried out electrically with automatic control of the oil temperature from 0 to — 10 ° C to turn on and off the electric heating of the oil are carried out by the switch installed in the distribution cabinet of the departure change mechanism. The slope of the spreader, which allows you to balance the displaced center of gravity of the container in relation to the horizontal plane, is regulated by pressing the buttons. When working with a lifting electromagnet, the command is used by the controller installed on the left cabinet of the control panel. The controller team has four provisions in the direction of «inclusion» and one position in the direction «rehabilitation». For the turning of the magnetic traverse, a rotary suspension is used, controlled by closing ropes. When working with a rotary suspension, if necessary, you can disable the final switch for the height of the load of the cargo supporting the winch by pressing the button.